| GEEEK G1 SE | SPECIFICATIONS |
| DIMENSIONS | 330 x 145 x 233mm (L x W x H) |
| VOLUME | 11.1 Litres |
| MATERIALS | Steel Frame, Aluminium, Acrylic |
| I/O | N |
| MOTHERBOARD COMPATIBILITY | Mini-ITX |
| MAX CPU COOLER HEIGHT | 66mm |
| EXPANSION SLOTS | 2 |
| MAX GPU LENGTH | 325mm |
| MAX GPU THICKNESS | 55mm |
| RADIATOR COMPATIBILITY | 120 / 240mm (single fan only) |
| MAX RADIATOR THICKNESS | 52mm (radiator + fans) |
| POWER SUPPLY COMPATIBILITY | SFX / SFX-L |
| CASE FANS SUPPORTED | Top: 2x 120mm Bottom: 2x 120mm |
| 2.5 / 3.5” DRIVES SUPPORTED | 4x 2.5” |
GEEEK G1 SE is 11.1L in volume and priced at US$119 and £119 in the UK. The G1 SE Mini ITX case uses sandwich style hardware layout and can be purchased with aluminium or acrylic side panels.
| GEEEK G1 SE | BUILD |
| MOTHERBOARD | GIGABYTE B550I AORUS PRO AX or MSI MPG B550I Gaming Edge MAX WiFi (paid link) |
| CPU | Ryzen 5 5600X or Ryzen 7 5700X (paid link) |
| CPU COOLER | Noctua NH-L9a chromax.Bla (paid link) or Alpenfohn Glacier Water 240 |
| GPU | RTX 3060 Ti (paid link) |
| PSU | Corsair SF 600 Platinum (paid link) |
| RAM | Crucial Ballistix, 16GB (2x8GB), 3600MHz, CL16 (paid link) |
| STORAGE | 512GB M.2 NVME (paid link) + 1TB M.2 NVME (paid link) |
| CASE FANS | Top: 2x Noctua NF-A12x25 chromax.Black (paid link) Bottom: 1x Noctua NF-A12x25 chromax.Black (paid link) |
The GEEEK G1 SE excellent adequate compatibility for its 1.1L volume and has clean/minimal exterior, using 2mm sandblasting and anodisation for the aluminium body which gives great finish while also being generally fingerprint resistant.
In the UK, the GEEEK G1 SE comes bundled with the 3.0 PCIe riser cable. We would have liked to see the option to buy the case only for those who already own a compatible riser cable. This is an available configuration on geeekstore.com.
The GEEEK G1 SE has good cooling capabilities, thanks to supporting both top and bottom case fans for intake and exhaust. We recommend using the aluminium panels rather than the acrylic for additional air fresh access for the CPU and GPU.
The case also supports AIO liquid cooling which is great for higher end hardware. Unfortunately the radiator mounting is located at the bottom of the case which may impact the AIOs lifespan as explained by GamersNexus. We hope GEEEK can move the radiator mounting to the top of the case and add support for 2x fans in future revision.