The Velka 7 is a premium Mini-ITX case at 6.2L in volume. The case uses full galvanised steel construction, with textured surface finish for better durability. Velka 7 can be purchased from Velkase for US$199, excluding riser cable / internal display extension cables.
SPECIFICATIONS
| MODEL | v2.1 | v3 |
| DIMENSIONS | 177×111×303mm (L×W×H) | 178×115×304mm (L×W×H) |
| VOLUME | 5.9 Litres | 6.2 Litres |
| MATERIALS | Aluminium Galvanised & Stainless Steel | Galvanised Steel (Powdered Coated) |
| CASE I/O | N | N |
| MOTHERBOARD SUPPORT | Mini-ITX | Mini-ITX |
| CPU COOLER CLEARANCE | 47mm | 48mm |
| PCIE EXPANSION SLOTS | 2 | 2 |
| GRAPHICS CARD COMPATIBILITY | 289×43×140mm (L×W×H) | 290×43×143mm (L×W×H) |
| POWER SUPPLY SUPPORT | SFX | SFX / SFX-L |
| 2.5 / 3.5″ DRIVES SUPPORTED | 1x 2.5″ (9.5mm thick) | 1x 2.5″ (7mm thick) |
| CASE FANS SUPPORTED | N/A | 2x 40mm |
| PANEL OFFSET | Optional 2~4mm side panel offset | Optional 5mm side panel offset (cleaner appearance) |
| INTERNAL DISPLAY CABLES | DisplayPort 1.2 & HDMI 2.0 (included) | N/A (not included) |
BUILD #1
| CASE | Velka 7 rev.3 |
| MOTHERBOARD | Rog Strix B650E-I Gaming WiFi (paid link) |
| CPU | R7 7800X3D (paid link) |
| CPU COOLER | Thermalright AXP90 FC (paid link) |
| GPU | Nvidia RTX 3060 Ti FE (paid link) |
| RISER | VC-S290G4 290 |
| PSU | Corsair SF 600 Platinum (paid link) |
| RAM | 32GB Gskill DDR5, 6000MHz, CL30 (paid link) |
| STORAGE | 1TB + 2TB NVME (paid links) |
| CASE FANS | 2x NF-A4x20 (paid link) |
| DISPLAY EXTENSION CABLES | P8Q-P6A-20CM: Internal DisplayPort 1.4 (paid link) A8Q-A6-20CM: Internal HDMI 2.1 (paid link) |
We’d recommend Nvidia RTX 5070 Super FE as best suited GPU for Velka 7 as of writing. You can also modify the RX 9700 XT Reaper to fit into Velka 7.
We did encounter some issues when enabling HDR on the ADT HDMI 2.1 display extension cable, but worked fine without. We’d recommend sticking to DisplayPort 1.4 cable, where possible or using the direct GPU I/O access at top of the case.